Swing Cylinders - clamping cylinder


SU-Series, Upper flange models swing cylinders
 
  • Enerpac upper flange model swing cylinders require minimal mounting height for when space is at a premium
  • Flexible design allows for manifold or threaded port connection
  • Low profile mounting style allows body to be below mounting surface
  • Simple mounting preparation and easy installation – 3 or 4 mounting bolts
  • Easy to machine fixture hole – does not require tight tolerances
  • Double oil connection – threaded port or manifold mount
  • Symmetrical rectangular flange design enables hydraulic clamping at three sides of the swing cylinder.


Click here to view the Catalogue Page
 

SL-Series, Lower flange models swing cylinders
 
  • Enerpac lower flange model swing cylinders do not require a  fixture hole – cylinder can be bolted directly to fixture
  • Flexible design allows for manifold or threaded port connection
  • Easiest mounting preparation in the swing cylinder line
  • Symmetrical rectangular flange design enables clamping at three sides of the cylinder
  • Allows extra large parts to be clamped


Click here to view the Catalogue Page
 

SC-Series, Cartridge model swing cylinders
 
  • Enerpac cartridge model swing cylinders the need for tubing and fittings.
  • Minimal space required on fixture
  • Can be completely recessed in fixture
  • External plumbing not required
  • Allows close positioning of adjoining units
  • Single and double acting cylinders provide hydraulic clamping force

Click here to view the Catalogue Page
 

ST-Series, Threaded body models swing cylinders
 
  • Enerpac threaded body model swing cylinders can be threaded directly into fixture, can be secured at any height
  • Body thread for precise swing cylinder height positioning
  • Threaded port connection
  • Easy installation and removal
  • Greatest flexibility in fixture design
  • Single and double acting cylinders provide hydraulic clamping force


Click here to view the Catalogue Page
 

CA, MA-Series, Clamp arms for swing cylinders
 
  • Enerpac swing cylinder clamp arms are a patented design – clamp arm can be easily installed and fastened while the cylinder is mounted in the fixture to allow exact arm positioning
  • Easy and precise location of the clamp arm in any position
  • Vise not required for fastening arms

Pressure vs. clamping force
The use of different length clamp arms requires reduction in apllied hydraulic pressure and resulting clamp force. Download the catalogue page showing the diagrams showing the pressure versus clamping force relation ship.



Click here to view the Catalogue Page
 

CAC, CAPT-Series, Pivoting T-arms
 
  • Enerpac pivoting t-arms, clamps two workpieces with one swing cylinder
  • Quick and precise clamp arm positioning
  • Two piece design allows for quick and precise positioning of clamp arm
  • Allows two parts to be clamped with only one cylinder
  • Pivoting of clamp arm in either direction allows for large differences in workpiece height
  • CAC-series collar attaches to swing cylinder plunger
  • CAPT-series arm attaches to collar and clamps to workpiece
  • T-arms are recommended for use on SU, SL, ST and SC-series double-acting swing cylinders


Click here to view the Catalogue Page
 

CAU-Series, Upreach clamp arms for swing cylinders
 
  • Enerpac upreach clamp arms for swing cylinders by design allow for more flexible part clamping
  • Arm can be easily installed and fastened while the cylinder is mounted in the fixture to allow exact arm positioning
  • Patented design – vise not required for fastening arms
  • Clamp arm length can be cut to desired size
  • Angled arm with minimal deflection achieves maximum workpiece contact


Click here to view the Catalogue Page
 

MP-Series, Swing cylinders Collet-Lok® design
 
  • Collet-Lok® design: ideal when live hydraulics are not available. Clamping is maintained mechanically so live hydraulics are not required during the machining cycle.
  • Double-acting Collet-Lok® action allows fully automated operation
  • Additional level of safety since live hydraulics are not required
  • Can either be mounted by the flange, or threaded into the fixture.


Click here to view the Catalogue Page
 

ASC-Series, Adjustable clamping stroke
 
  • Enerpac hydraulic swing clamps have an adjustable clamping stroke, turns clockwise or counter clockwise
  • Adjustable bolt in clamp arm for clamping stroke adjustment
  • Low profile, ideal for limited space applications
  • Quick swing action allows clamp arm to swing free of cutter and reclamp after it has passed
  • 94-100° clamp arm swing arc


Click here to view the Catalogue Page
 
© Copyright 2017 Shaw Hydraulics LimitedWeb Design By Toolkit Websites