Enerpac Valves & System Components

V-Series, Hydraulic Pressure and Flow Control Valves

  • Enerpac flow and pressure control valves are rated for 700 bar operating pressure
  • All valves feature NPTF porting to insure against leakage at rated pressure
  • All valves are painted, coated, or plated for corrosion resistance
  • Needle valves: to control cylinder speed
  • V-82: can also be used as shut-off valve for temporary load holding
  • V-182: as V-82, also suitable for gauge snubbing
  • V-8F: as V-82, but with very fine metering for precise flow control. Not remommended as shut-off valve
  • V-91: Snubber valve, prevent snapping of gauge pointer when load or pressure is suddenly released. Also suitable as shut-off valve to protect gauge during high cycle applications
  • V-10: auto damper valve; protect gauge during high cycle applications Check valves: for load holding with cylinders, to control oil flow direction
  • V-17 Check Valve: to resist shock and operate with low pressure drop
  • V-42 Pilot Operated Check Valve: pilot-operated, pilot pressure ratio 14%
  • V-66 Manually Operated Check Valve: manually operated
  • V-66F: same as V-66, but with fine metering for precise oil flow control
  • Pressure relief valves: limits pressure in circuit developed by pump
  • V-152 Adjustable Pressure Relief Valve: ±3% repeatability
  • V-161: sequence valve; to control oil flow to a secondary circuit.

Click here to view the Catalogue Page


VC, VE, VM-Series, 3-Way Directional Control Valves

  • Enerpac high pressure hydraulic three way directional control valves provide reliable control of single-acting cylinders and tools
  • Manual or solenoid operation
  • Adjustable relief valve on VM and VE-series valves
  • All VM and VE-series valves feature several gauge ports for system, A and B port pressure monitoring
  • All hydraulic valves (except VM32, VE32D and VC-series) include manifold with built-in "system check" feature for more precise pressure holding and system control
  • VC-series remote valves include Return Line Kit VRL-10

Click here to view the Catalogue Page


R VC, VE, VM-Series, 4-Way Directional Control Valves

  • Enerpac high pressure hydraulic four way directional control valves provide reliable control of double-acting cylinders and tools
  • Manual or solenoid operation
  • Adjustable relief valve on VM and VE-series valves
  • All VM and VE-series directional control valves feature several gauge ports for system, A and B port pressure monitoring
  • All hydraulic valves (except VC-series) include manifold with built-in "system check" feature for more precise pressure holding and system control
  • VC-series remote valves include Return Line Kit VRL-10

Click here to view the Catalogue Page


A-Series, C-Clamp and Arbor Presses

C-Clamp Press

  • 5, 10 and 20 ton capacity
  • Operational in all positions

Arbor Press

  • 10 and 30 ton capacity
  • Foot mounting holes for horizontal and vertical positioning
  • Machined working surfaces for easier fixturing
  • Slotted back to simplify loading and unloading of longer parts.

Click here to view the Catalogue Page


R H700-Series, High Pressure Hydraulic Hoses

Thermo-Plastic Safety Hydraulic Hoses (700-Series)

  • For demanding applications, featuring a 4:1 safety factor
  • Maximum working pressure of 700 bar
  • Outside jacket is polyurethane, to provide maximum abrasion resistance
  • Exhibits low volumetric expansion under pressure to enhance overall system efficiency
  • Crimped-on rubber strain relief for improved life and durability on all hydraulic hose models.

Click here to view the Catalogue Page


A, C, F, T-Series, Hydraulic Couplers

Thermo-Plastic Safety Hydraulic Hoses (700-Series)

  • Enerpac hydraulic couplers provide quick connection of hydraulic lines
  • 700 and 800 bar 1/4" couplers for torque wrenches
  • 700 bar 3/8" couplers for cylinders, tools and pumps

Click here to view the Catalogue Page


Hydraulic Oil, Manifolds and Fittings

Enerpac HF Hydraulic Oil

  • Maximum pump volumetric efficiency
  • Maximum internal heat transfer
  • Prevents pump cavitation
  • Additives prevent rust, oxidation and sludge
  • High viscosity index
  • Maximum film protective lubricity

Use only genuine Enerpac Hydraulic Oil. The use of any other fluid will render your Enerpac warranty null and void.

Click here to view the Catalogue Page


BFZ, FZ-Series, High Pressure Fittings

  • Enerpac workholding high pressure fittings provide a proper connection for hydraulic components
  • Male and female BSPP, UNF, NPT threaded fittings in common sizes allow easy connection of all components
  • BFZ and FZ-1000 pressure fitting models are 700 bar maximum pressure
  • FZ-2000 pressure fitting models are 350 bar maximum pressure

Click here to view the Catalogue Page


G, H-Series, Hydraulic Pressure Gauges

Glycerine Filled Hydraulic Pressure Gauges (G-Series)

  • Dual scale reading calibrated in bar and psi
  • All pressure sensing parts sealed and dampened by glycerine for long life
  • Includes safety blow-out disk and pressure equalizing membrane
  • Gauge snubbers or needle valves recommended for high cycle applications.

High Cycle Dry Hydraulic Pressure Gauges (H-Series)

  • Dual scale reading calibrated in bar and psi
  • Ideal for use in many applications, specifically for high cycle and harsh environments
  • Gauge snubbers or needle valves recommended to shut off gauge when not in use.

Click here to view the Catalogue Page


GF, GP-Series, Hydraulic Force & Pressure Gauges

  • Enerpac GF-Series hydraulic force and pressure gauges are calibrated with dual scale reading for pressure and force in bar and kN
  • All hydraulic pressure sensing parts are sealed and dampened by glycerine for long life
  • Calibrated with dual scale reading for pressure in bar and psi
  • Excellent readability: gauge face dimensions 100 mm
  • Fast, easy installation
  • Stainless steel gauge cases for corrosion resistance.

Click here to view the Catalogue Page


T-Series, Test System Gauges

  • Enerpac test system gauges are calibrated for dual scale reading in psi and bar
  • All test gauges have spring-loaded backs with rubber blow-out plugs to protect case assembly in case of over-pressurization
  • Integral maximum indicator pointer standard included
  • 2800 and 3500 bar models include flange mounting
  • ½" NPTF versions are made of high strength alloy steel
  • 0.25" cone models are made of 316 stainless steel, with 403 stainless steel on 2800 and 3500 bar models.

Click here to view the Catalogue Page


DGR-Series, Digital Hydraulic Pressure Gauges

  • Rated for system pressure up to 1380 bar
  • Displays in multiple units: psi, bar, mPA, kg/cm2 (user selectable)
  • Zero reset – ensures that gauge reads actual system pressure
  • Batteries included, condition indicator on readout
  • IP65 rated case design
  • Shut off selectable – menu driven
  • UL listed, CE and RoHS compliant.

Click here to view the Catalogue Page


GA, NV, V-Series, Gauge Accessories

GA-Series Gauge Adaptor

  • For easy mounting of a gauge onto your hydraulic system

GA-918 Swivel Adaptor

  • Simplifies gauge installation
  • Provides swivel connection for easy scale reading

V-91 and NV-251 Needle Valves

  • V-91 Snubber valve: provide positive shut-off
  • NV-251: 303 Stainless steel stem, 16 threads/inch

Click here to view the Catalogue Page

© Copyright 2017 Shaw Hydraulics LimitedWeb Design By Toolkit Websites