System Components

FL-Series, High Pressure Filters

  • Enerpac workholding inline high pressure filters to keep your hydraulic system clean
  • Plated stainless steel wire mesh screen
  • Rated for full system pressure up to 350 bar
  • Filtration of hydraulic oil in advance and retract oil flow direction
  • Two piece body construction for easy replacement of filter elements
  • High flow rates are obtainable with a minimum pressure drop
  • Threaded port connections on each end simplify installation

CR, CRV-Series, Rotary Couplers

  • Enerpac rotary couplers provide a permanent hydraulic connection on indexing and rotating work stations
  • High rotation per minute
  • Low starting torque
  • Internal oil bearings for increased lifetime
  • Single, 2 or 4 passage coupler type

MCA, MPA, WCA-Series, Auto-Coupler Systems

  • Enerpac auto-coupler systems are available in two (62 and 82 model) or four port (64 model) connection
  • For automated coupling of hydraulic circuits on palletized systems
  • Sensing feedback of coupler position allows for fully automated applications
  • Horizontal or vertical mounting for flexible installation on machine tools
  • Adjustment stroke allows clearance for pallet indexing
  • Coupler elements supplied with air blow-off nozzles to prevent damage from contamination
  • Two base station auto-coupler models: MCA-62 for low pallets clearance; WCA-82 for additional pallet clearance.

AC-Series, Accumulators

  • Enerpac workholding Accumulators maintain circuit pressure
  • Ideal for high frequency and rapid discharge applications
  • ACL series are pre-charged to 100 bar
  • Corrosion resistant bodies on ACL series
  • Spring actuated accumulator for ACM-1
  • High energy storage capacity in a compact package

Accumulator coupler packages

  • Compact design for easy use of accumulators
  • Single design accommodates both single-acting or double-acting circuit
  • Relief valve, ball check shut-off, glycerin-filled gauge included
  • Supplied standard with one male coupler (AH-652)
  • Optional manifold mounting. O-ring seals located on bottom of block only for single-acting circuit

G-Series, Pressure Gauges

  • Enerpac workholding pressure gauges are highly reliable
  • Accurate pressure sensing, ± 1,5 % accuracy of full scale
  • All pressure sensing parts sealed and dampened by glycerine for long life
  • Includes safety blow-out disk and pressure equalizing membrane to prevent overpressurization
  • Copper alloy, coiled safety Bourdon tube for 70 bar and higher
  • Dual psi and bar scale readings

A-Series, Manifolds

  • Enerpac workholding hydraulic manifolds are designed for multiple hydraulic line connections at one central location
  • Directing hydraulic oil to or from a pressure source

A, C-Series, Hydraulic Couplers

Enerpac workholding hydraulic couplers

C-series, high flow couplers

  • High pressure couplers recommended for use on all Enerpac pumps and cylinders

A-series, quick connect couplers

  • Low leakage couplers for easy connection of hydraulic circuits

H700-Series, High Pressure Hoses

  • Enerpac high pressure hoses have a maximum workholding pressure of 700 bar
  • Thermo-Plastic Safety Hoses
  • For demanding applications, featuring a 4:1 design factor
  • Four layer design, including two high strength steel wire braids
  • Outside jacket is polyurethane to provide maxium abrasion resistance
  • Low volumetric expansion under pressure to enhance overall system efficiency
  • Crimped-on rubber strain relief for improved life and durability on all models

GA, GS, NV, V-Series, Gauge Accessories

Enerpac workholding gauge accessories:

GA-Series Gauge Adaptor

  • For easy mounting of a gauge onto your hydraulic system

GA-918 Swivel Adaptor

  • Simplifies gauge installation
  • Provides swivel connection for easy scale reading

V-91 and NV-251 Needle Valves

  • V-91 Snubber valve: provide positive shut-off
  • NV-251: 303 Stainless steel stem, 16 threads/inch

BFZ, FZ-Series, High Pressure Fittings

  • Enerpac workholding high pressure fittings provide a proper connection for hydraulic components
  • Male and female BSPP, UNF, NPT threaded fittings in common sizes allow easy connection of all components
  • BFZ and FZ-1000 pressure fitting models are 700 bar maximum pressure
  • FZ-2000 pressure fitting models are 350 bar maximum pressure

DGR-Series, Digital Pressure Gauge

  • Enerpac workholding digital pressure gauge has two modes:
  • Automatic shut off (15 min)
  • Continuous gauge display
  • Zero reset - ensures that gauge reads actual system pressure
  • Display in psi, bar, MPa, mbar, hPa and kPa
  • 3 volt battery, 1400 hours operation
  • IP 65 protection

GF, GP-Series, Hydraulic Force & Pressure Gauges

  • Enerpac GF-Series hydraulic force and pressure gauges are calibrated with dual scale reading for pressure and force in bar and kN
  • All hydraulic pressure sensing parts are sealed and dampened by glycerine for long life
  • Calibrated with dual scale reading for pressure in bar and psi
  • Excellent readability: gauge face dimensions 100 mm
  • Fast, easy installation
  • Stainless steel gauge cases for corrosion resistance.

Click here to view the Catalogue Page


G, H-Series, Hydraulic Pressure Gauges

Glycerine Filled Hydraulic Pressure Gauges (G-Series)

  • Dual scale reading calibrated in bar and psi
  • All pressure sensing parts sealed and dampened by glycerine for long life
  • Includes safety blow-out disk and pressure equalizing membrane
  • Gauge snubbers or needle valves recommended for high cycle applications.

High Cycle Dry Hydraulic Pressure Gauges (H-Series)

  • Dual scale reading calibrated in bar and psi
  • Ideal for use in many applications, specifically for high cycle and harsh environments
  • Gauge snubbers or needle valves recommended to shut off gauge when not in use.

Click here to view the Catalogue Page


A, C, F, T-Series, Hydraulic Couplers

Thermo-Plastic Safety Hydraulic Hoses (700-Series)

  • Enerpac hydraulic couplers provide quick connection of hydraulic lines
  • 700 and 800 bar 1/4" couplers for torque wrenches
  • 700 bar 3/8" couplers for cylinders, tools and pumps

Click here to view the Catalogue Page


Hydraulic Oil, Manifolds and Fittings

Enerpac HF Hydraulic Oil

  • Maximum pump volumetric efficiency
  • Maximum internal heat transfer
  • Prevents pump cavitation
  • Additives prevent rust, oxidation and sludge
  • High viscosity index
  • Maximum film protective lubricity

Use only genuine Enerpac Hydraulic Oil. The use of any other fluid will render your Enerpac warranty null and void.

Click here to view the Catalogue Page

© Copyright 2017 Shaw Hydraulics LimitedWeb Design By Toolkit Websites