Tel: +44 (0) 1252 837423
Mob: 07802 690978

Email: steve@shaw-hydraulics.co.uk

       

  01252 837 423       07802 690 978
 steve@shaw-hydraulics.co.uk

Bolting Tools

Advanced Mechanical & Hydraulic Bolting Equipment

Enerpac’s comprehensive range of mechanical and hydraulic bolting equipment provides precise & effective force to make your work more productive, safer, and easier to perform. From joint assembly, controlled tightening, torque wrench pumps to joint separation, Enerpac’s bolting equipment, tools & accessories offer the solution best-suited to the project, available from one source.

Joint Assembly Tools Controlled Tightening Tools Joint Disassembly Tools Bolting Tools

Joint Assembly Tools

Correct joint assembly and alignment are crucial to joint integrity whether you are pulling in a pipeline connection, fitting winches to a boat deck or overhauling a dragline, the wide range of Enerpac’s Joint Assembly products provide simple-to-use, dependable solutions to the time-consuming, less accurate traditional methods.

Scroll to Top Enquire

FF Series Mechanical Flange Face Tool

Pipe Flange Cutting Diameter Range 25 - 305mm / 1-12"
Internal Pipe Mounting Range 25 - 152 mm / 1-6"
Max. Operating Cutting Resultant Roughness Ra 3.2 - 12.5 µ

Info

RCH Series Hollow Plunger Cylinders

Capacity 13 - 95 ton
Stroke 8 - 155 mm
Cneter Hole Diameter 19.6 - 79.0 mm
Max. Operating Pressure 700 bar

Info

ATM Series Flange Alignment Tools

Min. Bolt Size 16 - 31.5 mm
Flange Wall thickness 14 - 228 mm
Max. Force 10 - 90 kN

Info

SC Series Cylinder Pump Sets

Capacity 5 - 95 ton
Stroke 38 - 362 mm
Max. Operating Pressure 700 bar

Info

Controlled Tightening Tools

Enerpac offers a variety of controlled tightening tools to best meet the requirements of your application. From mechanical torque multipliers to hydraulically driven square drive wrenches, and low profile torque wrenches. We offer the hydraulic torque tools you need for accurate and simultaneous tightening of multiple bolts.

Scroll to Top Enquire

PTW Series Pneumatic Torque Wrenches

Nominal Torque Output 8135 Nm
Square Drive Range Square Drive Range 1" - 1.5"

Info

ETW Series Electric Torque Wrenches

Nominal Torque Output 8135 Nm
Square Drive Range 1 - 10 inch

Info

PGT Series Hydraulic Power Generation Bolt Tensioners

Bolt Range M20 - M42
Max. Load Capacity 938.7 kN
Max. Operating Pressure 1500 bar

Info

FTR Series Hydraulic Foundation Bolt Tensioners

Max. Load Capacity 2736 kN
Max. Operating Pressure 1500 bar
Max. Operating Pressure 700 bar

Info

S Series X Edition Square Drive Hydraulic Torque Wrenches

Nominal Torque 35.455 Nm
Square Drive Range 3/4" - 2 1/2"
Nose Radius 25 - 64 mm Max. Operating Pressure 690 bar

Info

FTE Series Hydraulic Elliptical Foundation Bolt Tensioners

Max. Load Capacity 761.1 kN
Max. Operating Pressure 1500 bar

Info

W Series X Edition Hexagon Hydraulic Torque Wrenches

Nominal Torque 47.454 Nm
Hexagon Range 30 - 155 mm | 1 1/6" - 6 1/8"
Max. Operating Pressure 690 bar

Info

W Series Ultraslim Stepped Width Torque Wrench Cassettes

Nominal Torque Output 5911 Nm
Bi-Hexagonal Range 46 - 75 mm
Max. Operating Pressure 690 bar

Info

WCR Series Roller Cassette Torque Wrench

Bi-Hexagonal Spanner Size 36 - 80 mm
Spanner Nose Radius 31 - 55
Nominal Torque 5762 Nm
Max. Operating Pressure 690 bar

Info

S Series Square Drive Hydraulic Torque Wrenches

Nominal Torque 35.455 Nm
Max. Operating Pressure 690 bar

Info

W Series Low Profile Hexagon Wrenches

Nominal Torque 47.454 Nm
Hexagon Range 30 - 155 mm
Max. Operating Pressure 690 bar

Info

E Series Manual Torque Multipliers

Nominal Torque Output 1015 - 10.845 Nm
Torque Ratio 3:1 - 52:1
Output Ratio Accuracy ± 5%

Info

GT Series Hydraulic Bolt Tensioners

Bolt Range M16-M95 / 5/8" - 3 3/4"
Maximum Load 2845 kN
Max. Operating Pressure 1500 bar

Info

BSH Series Heavy Duty Sockets

Hexagon Size 19 - 155 mm
3/4" - 6 1/8"

Info

HT-B Series Ultra-High Pressure Hoses and Couplings

Max. Operating Pressure 1500 bar

Info

THQ Series Torque Wrench Hoses

Lengths 6 - 12 m
Max. Operating Pressure 700 - 800 bar

Info

Joint Disassembly Tools

Correct joint disassembly is especially important during maintenance operations. Separation of stubborn joints is often a laborious and time-consuming task. Traditional methods may carry the risk of personal injury or damage to expensive joint components. Our wide range of Joint Separation equipment is designed specifically to provide quicker, simpler and safer solutions.

Scroll to Top Enquire

FSH FSM Series Hydraulic and Mechanical Wedge Spreaders

Tip Clearance / Max. Spread 6 mm / 80 mm
Max. Operating Pressure 700 bar

Info

FS Series Hydraulic Flange Spreaders

Capacity 5 - 10 ton
Spread 70 - 216 mm
Max. Operating Pressure 700 bar

Info

NC Series Single Acting Hydraulic Nut Splitters

Hexagon Nut Range 10 - 75 mm
Bolt Range M6 - M48
Max. Operating Pressure 700 bar

Info

NS Series Hydraulic Nut Splitters

Capacity 917 - 1711 kN
Hexagon Nut Size 70 - 130 mm
Bolt Range M45 - M90
Max. Operating Pressure 700 bar

Info

A WR Series Hydraulic Wedgie and Spread Cylinders

Capacity 0.75 - 1.0 ton
Tip Clearance 12.8 - 35.0 mm
Max. Spread 94 - 292 mm
Max. Operating Pressure 700 bar

Info

Hydraulic Bolting Tools

Enerpac’s comprehensive range of mechanical and hydraulic bolting equipment provides precise & effective force to make your work more productive, safer, and easier to perform. From joint assembly, controlled tightening, torque wrench pumps to joint separation, Enerpac’s bolting equipment, tools & accessories offer the solution best-suited to the project, available from one source.

Scroll to Top Enquire

PME PMU Series Portable Electric Torque Wrench Pumps

Reservoir 1.9 - 3.8 litres
Flow at Rated Pressure 0.33 l/min
Motor Size 0.37 kW
Max. Operating Pressure 700 - 800 bar

Info

ZU4T Series Electric Torque Wrench Pumps

Reservoir 4.0 and 8.0 litres
Flow at Rated Pressure 1.0 l/min
Motor Size 1.25 kW
Max. Operating Pressure 700 and 800 bar

Info

ZU4T Series Classic Torque Wrench Pump

Reservoir 4.0 - 8.0 litres
Flow at Rated Pressure 1.0 l/min
Motor Size 1.25 kW
Max. Operating Pressure 700 bar

Info

LAT-Series Torque Wrench Pump

Reservoir 1.9 - 3.8 litres
Flow at Rated Pressure 0.33 l/min
Motor Size 0.37 kW
Max. Operating Pressure 700 - 800 bar

Info

ZE Series Electric Torque Wrench Pumps

Reservoir 4 - 40 litres
Flow at Rated Pressure 0.82 - 1.62 l/min
Motor Size 1.1 - 2.2 kW
Max. Operating Pressure 700 - 800 bar

Info

TQ Series Lightweight Electric Torque Wrench Pump

Reservoir 4 litres
Max. Operating Pressure 700 bar

Info

PTA Series Compact Pneumatic Torque Wrench Pump

Reservoir 3.8 litres
Flow at Rated Pressure 0.33 l/min
Air Consumption 1133 l/min
Max. Operating Pressure 700 - 800 bar

Info

ZA4T Series Air Driven Torque Wrench Pumps

Reservoir 4.0 and 8.0 litres
Flow at Rated Pressure 0.8 - 1.01 l/min
Air Consumption 600 - 2840 l/min
Max. Operating Pressure 700 - 800 bar

Info

ZUTP Series Electric Tensioning Pumps

Reservoir 4 litres
Flow at Rated Pressure 0.33 l/min
Max. Operating Pressure 1500 bar

Info

ATP Series Ultra High Pressure Air Pump

Reservoir 3.8 litres
Flow at Rated Pressure 0.07 l/min
Max. Operating Pressure 1500 bar

Info

HPT Series Tensioning Hand Pump

Reservoir 2.5 litres
Flow at Rated Pressure 0.61 cm³ / stroke
Max. Operating Pressure 1500 bar

Info

ST Series Bolting Tool Pump Sets

Capacity 5 - 20 ton
Max. Operating Pressure 700 bar

Info

HT B Series Accessories for Bolt Tensioners and Pumps

Max. Operating Pressure 1500 bar

Info

THQ Series Torque Wrench Hoses

Lengths 6 - 12 m
Max. Operating Pressure 700 - 800 bar

Info

RSL, Low-Profile Hexagon Torque Wrenches

Info

DSX-Series, Aluminium Torque Wrenches

Info

HMT-Series, Modular Torque Wrenche

Info

MCS-Series, Mobile Calibration System

Info
© Copyright 2024 Shaw Hydraulics LimitedWeb Design By Toolkit Websites